The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for installation
|
|
Review preparation to ensure work complies with requirements of relevant legislation, codes, regulations and standards Completed |
Evidence:
|
Notify customer to verify installation order and arrange for site access to comply with security arrangements Completed |
Evidence:
|
Notify supervisor of identified safety hazards at the work site and complete a job safety analysis (JSA) before commencing work Completed |
Evidence:
|
Confirm location of digital reception equipment and fittings with customer Completed |
Evidence:
|
Identify barriers to installation and develop strategies to overcome them within time and budget restrictions Completed |
Evidence:
|
Select and obtain tools and materials appropriate for the work order Completed |
Evidence:
|
Install hardware and equipment
|
|
Measure signal level at wall plate to ensure received signal strength is adequate Completed |
Evidence:
|
Test customer’s existing equipment for operational condition and reception quality Completed |
Evidence:
|
Notify customer of detected problems and record remedial actions if required Completed |
Evidence:
|
Identify interconnection cabling requirements and prepare cables for job requirements Completed |
Evidence:
|
Affix wall plate to agreed position on wall and secure cable according to specification Completed |
Evidence:
|
Connect set top unit to customer equipment and connect cabling between wall plate and set top unit following occupational health and safety (OHS) and environmental requirements Completed |
Evidence:
|
Power up set top unit and configure it to customer requirements Completed |
Evidence:
|
Activate customer services to complete hardware installation where required Completed |
Evidence:
|
Commission and test installation
|
|
Conduct functional test to assess transmission signal quality Completed |
Evidence:
|
Conduct tests to ensure that quality of all services are being delivered against pre-existing conditions Completed |
Evidence:
|
Check that all interconnected equipment is functional Completed |
Evidence:
|
Finalise installation and handover to customer
|
|
Restore site to original condition and customer satisfaction Completed |
Evidence:
|
Assess damages that may have occurred during installation and arrange with customer for repair or replacement of damaged components Completed |
Evidence:
|
Remove waste and debris from site and dispose of in a safe and environmentally appropriate manner Completed |
Evidence:
|
Conduct customer training appropriate to the equipment, services and vendor literature Completed |
Evidence:
|
Complete contract documentation
|
|
Provide warranties to customer in required format where work and equipment are subject to warranty Completed |
Evidence:
|
Prepare invoices and other financial documentation, where required, and present to customer Completed |
Evidence:
|
Obtain authorised signatures on required documentation to confirm acceptance of completed work Completed |
Evidence:
|