NTISthis.com

Evidence Guide: AURVTT018 - Fabricate and install automotive and marine soft top hoods

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

AURVTT018 - Fabricate and install automotive and marine soft top hoods

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to fabricate soft top hood

  1. Job requirements are determined from workplace instructions
  2. Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
  3. Materials required to fabricate soft top hoods are selected and inspected for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required to fabricate soft top hoods are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Undertake fabrication and installation activities

  1. Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions
  2. Specialist tools and equipment are used according to safety and environmental requirements
  3. Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements
  4. Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components
  5. Installation and fastening are checked for correct operational requirements
Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specialist tools and equipment are used according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation and fastening are checked for correct operational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare to fabricate soft top hood

  1. Job requirements are determined from workplace instructions
  2. Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
  3. Materials required to fabricate soft top hoods are selected and inspected for quality
  4. Hazards associated with the work are identified and risks are managed
  5. Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  6. Work is planned to minimise waste and use time efficiently
Job requirements are determined from workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials required to fabricate soft top hoods are selected and inspected for quality

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Hazards associated with the work are identified and risks are managed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned to minimise waste and use time efficiently

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Undertake fabrication and installation activities

  1. Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions
  2. Specialist tools and equipment are used according to safety and environmental requirements
  3. Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements
  4. Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components
  5. Installation and fastening are checked for correct operational requirements
Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specialist tools and equipment are used according to safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation and fastening are checked for correct operational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete work processes

  1. Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use
  2. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  3. Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  4. Workplace documentation is processed according to workplace procedures
Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Workplace documentation is processed according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate soft top hood

1.1 Job requirements are determined from workplace instructions

1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

1.3 Materials required to fabricate soft top hoods are selected and inspected for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Undertake fabrication and installation activities

2.1 Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions

2.2 Specialist tools and equipment are used according to safety and environmental requirements

2.3 Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements

2.4 Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components

2.5 Installation and fastening are checked for correct operational requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Required Skills and Knowledge

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section.

1. Prepare to fabricate soft top hood

1.1 Job requirements are determined from workplace instructions

1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

1.3 Materials required to fabricate soft top hoods are selected and inspected for quality

1.4 Hazards associated with the work are identified and risks are managed

1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

1.6 Work is planned to minimise waste and use time efficiently

2. Undertake fabrication and installation activities

2.1 Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions

2.2 Specialist tools and equipment are used according to safety and environmental requirements

2.3 Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements

2.4 Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components

2.5 Installation and fastening are checked for correct operational requirements

3. Complete work processes

3.1 Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use

3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

3.4 Workplace documentation is processed according to workplace procedures

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

fabricate and install one vehicle or vessel soft top hood to specifications.

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to fabricating and installing automotive and marine soft top hoods, including procedures for:

selecting and using personal protective equipment (PPE)

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials

types of hoods and soft tops, including:

soft top materials

methods of operation

component parts

types of windows

type, use and basic maintenance of trimming tools and equipment

original equipment manufacturer (OEM) specifications relating to soft top hoods

types of materials and consumables and their applications, including:

fabrics

fasteners

adhesives

methods and techniques for fabricating soft top hoods, including:

selecting material

planning

measuring

marking out

cutting

sewing

using adhesives

making up and assembling

fitting and fastening

quality requirements relating to fabricating and installing vehicle soft top hoods

procedures for protecting vehicle and components when installing soft top hoods

procedures for final inspection of fabricated and installed soft top hoods.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Materials must include:

adhesives

vinyl

fabric

clear plastic

soft top fasteners.

Safety and environmental requirements must include:

work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for:

selecting and using PPE

using specialist tools and equipment

manually handling materials

environmental requirements, including procedures for storing and disposing of waste materials.