The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to work
|
|
Clarify requirements of the work responsibilities with the supervisor Completed |
Evidence:
|
Identify equipment and material resource requirements Completed |
Evidence:
|
Identify work health and safety hazards, assess risks and implement risk controls Completed |
Evidence:
|
Select, use and maintain personal protective equipment according to enterprise procedures Completed |
Evidence:
|
Carry out engine and equipment checks
|
|
Carry out regular engine equipment checks on machinery and equipment Completed |
Evidence:
|
Lubricate all relevant grease or lubricant points Completed |
Evidence:
|
Change oils and filters at intervals prescribed in operator manual Completed |
Evidence:
|
Check hydraulic hoses and systems for deterioration and rectify defects Completed |
Evidence:
|
Carry out transmission checks
|
|
Check drive and steering clutches for operation and adjust where required Completed |
Evidence:
|
Check transmission oil levels Completed |
Evidence:
|
Check tracks or wheels and undercarriage for oil leaks and wear Completed |
Evidence:
|
Identify faulty seals or leaks and take corrective actions where required Completed |
Evidence:
|
Clean machine as a part of maintenance checks Completed |
Evidence:
|
Maintain components and attachments
|
|
Check components for wear and condition Completed |
Evidence:
|
Replace worn or unserviceable replacement components as part of daily routines Completed |
Evidence:
|
Complete component inspection and replacement activities Completed |
Evidence:
|
Check moving operational components for wear and condition and adjust to the tolerances specified in operator manual where applicable Completed |
Evidence:
|
Clean and maintain work areas and return to operating condition Completed |
Evidence:
|
Collect, treat and dispose or recycle waste from maintenance activities according to enterprise environmental requirements Completed |
Evidence:
|
Record maintenance
|
|
Record identified faults and defects in machine record Completed |
Evidence:
|
Record maintenance procedures including duplicates usage in workshop record Completed |
Evidence:
|
Report and action service or repair requirements Completed |
Evidence:
|