Application
The unit involves setting up, operating and maintaining end matching operations in a forest factory environment setting The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan production parameters | 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to setting up, operating and maintaining end matching operations are identified and followed 1.2. Work order is reviewed and clarified with appropriate personnel 1.3. Cross sections, grades and quantities of timber requiring rework are monitored 1.4. Order requirements including cross sections and end use are monitored 1.5. Schedules are developed for end matching operations and details are communicated to relevant personnel 1.6. Communication with others is established and maintained in line with OHS requirements |
2. Set up end matching operation | 2.1. Equipmentchecks and pre-startup checks are carried out on all end matching processes in line with manufacturer recommendations 2.2. Suitable personal protective equipment and clothing are selected, used and maintained 2.3. Potential and existing risks and hazards in the work area are identified and controlled 2.4. Trial joints are cut, end profiles checked, and trial boards joined and tested in line with site procedures 2.5. Trial joints that achieve the desired outcomes are added to the process 2.6. Trial joints that do not achieve the desired outcomes are disposed of in line with site procedures and environmental requirements 2.7. Faults in end matching operations are identified and adjustments made as required to maintain workflow 2.8. Sub-standard joints are disposed of in line with site procedures and environmental requirements |
3. Maintain end matching process | 3.1. End matching production is monitored and maintained in line with site procedures 3.2. Routine maintenance of end matching equipment is planned and conducted in line with maintenance schedules and manufacturer recommendations 3.3. Equipment faults are recognised through monitoring equipment operation and finished product, and are corrected or repaired when within own role and competence to do so 3.4. Assistance is sought as required to identify equipment faults and resolve problems 3.5. Production and workplace records are completed and maintained in line with site procedures |
Required Skills
This describes the essential skills and knowledge and their level required for this unit. |
Required skills |
Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely perform end matching operations; maintain board production at optimum rate and finish quality Communication skills sufficient to use appropriate communication and interpersonal techniques and methods with colleagues and others Literacy skills sufficient to record and report workplace information; maintain documentation; locate, interpret and apply relevant information and specifications in written, diagrammatic or verbal form; interpret technical or grammatical information; apply common industry terminology Numeracy skills sufficient to measure, estimate and calculate time required to complete a task Problem solving skills sufficient to identify problems and equipment faults; demonstrate appropriate response procedures |
Required knowledge |
Applicable commonwealth, state or territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for setting up, operating and maintaining end matching operations Environmental protection requirements, including the safe disposal of waste material, the minimisation of carbon emissions, and the cleaning of plant, tools and equipment Organisational and site standards, requirements, policies and procedures for setting up, operating and maintaining end matching operations Environmental risks and hazards Procedures for recycling and re-using trial joints that do not achieve the desired outcomes/sub-standard joints Methods to monitor and schedule end matching production Industry cross sections and tolerances Operational principles and limitations of end matching equipment Established communication channels and protocols Problem identification and resolution strategies, and common fault finding techniques Types of tools and equipment, and procedures for their safe use and maintenance Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks Procedures for recording and reporting workplace information |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently plan and develop production schedules, set up and maintain equipment, and monitor end matching operations to produce finished timber products |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to, and satisfy all of the requirements of the elements of this unit and include demonstration of: following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to setting up, operating and maintaining end matching operations following organisational policies and procedures relevant to setting up, operating and maintaining end matching operations planning production parameters, including developing and disseminating schedules setting up, operating and maintaining end matching operations, including maintaining equipment and cutters, and resolving problems |
Context of and specific resources for assessment | Competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to follow relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to undertaking work applicable to this unit specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge Assessment may be applied under project-related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency The assessment environment should not disadvantage the candidate Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English Where the participant has a disability, reasonable adjustment may be applied during assessment Language and literacy demands of the assessment task should not be higher than those of the work role |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS requirements: | are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management safe forest practices, including required actions relating to forest fire elimination of hazardous materials and substances manual handling including shifting, lifting and carrying |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisational requirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use, maintenance and storage requirements environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines) |
End matching may include: | timber butt joints structural joints hardware |
Appropriate personnel may include: | supervisors clients colleagues line management |
Schedules may include: | timber cross sections to be end matched end matching profiles finished product grades quantities to be produced changeover times and may be communicated to: docking area end matching section material handling personnel |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice |
Equipmentchecks may include: | checking and installing cutters setting feed rates to suit end profile timber cross section and characteristics setting guides and conveyers to suit timber cross section |
Disposing of may include: | recycling trial joints that do not achieve the desired outcomes/sub-standard joints re-using trial joints that do not achieve the desired outcomes/sub-standard joints redirecting trial joints that do not achieve the desired outcomes/sub-standard joints for energy recovery |
Maintenance of cutters may include inspecting: | grinding sharpening set adjustment |
Sectors
Not Applicable
Competency Field
Common Technical |
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor