Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
MEM26002 Mapping and Delivery Guide
Lay up composites using vacuum closed moulding techniques
Version 1.0
Issue Date: June 2024
Qualification | - |
Unit of Competency | MEM26002 - Lay up composites using vacuum closed moulding techniques |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | This unit of competency defines the skills and knowledge required to fabricate composites using vacuum infusion processing (VIP) or other vacuum closed moulding techniques. This unit is one of three units covering the basic composite fabrication techniques, the other two being unit MEM26001 Lay up composites using open moulding techniques and unit MEM26003 Lay up composites using pressure closed moulding techniques, which together are intended to ensure the composite tradesperson can undertake a basic fabrication using these methods.No licensing, legislative or certification requirements apply to this unit at the time of publication. Band: AUnit Weight: 6 | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field | Composites |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Determine product requirements |
| |||||||
Element: Comply with work health and safety (WHS) requirements at all times | ||||||||
Element: Select and use appropriate personal protective equipment (PPE) in accordance with SOPs | ||||||||
Element: Identify product requirements from specifications, job sheets or work instructions and customer requests | ||||||||
Element: Select vacuum closed mould technique most appropriate to product requirements | ||||||||
Element: Identify or develop required procedures to make product using selected process | ||||||||
Element: Set up mould equipment and prepare materials |
| |||||||
Element: Prepare and assemble all equipment and ancillary equipment as required by procedures | ||||||||
Element: Pack mould according to procedures/laminate schedule | ||||||||
Element: Identify required reinforcing/reinforcing system and determine quantity of reinforcing | ||||||||
Element: Prepare reinforcing, including cutting to size/shape, and carry out any pre-treatment, as required | ||||||||
Element: Identify required resin system | ||||||||
Element: Determine quantity of resin components and confirm adequate quantities are available | ||||||||
Element: Mix resin with minimised waste and test resin | ||||||||
Element: Fabricate and adjust equipment and materials, as required |
| |||||||
Element: Apply gel coat and introduce resin to mould | ||||||||
Element: Ensure required resin distribution | ||||||||
Element: Cure product and remove product from mould when ready | ||||||||
Element: Identify typical problems and take appropriate remedial action | ||||||||
Element: Perform final verification to meet product requirements | ||||||||
Element: Clean up and maintain tools and equipment |
| |||||||
Element: Undertake minor maintenance, as appropriate | ||||||||
Element: Prepare for next use or storage | ||||||||
Element: Inspect equipment and take appropriate action | ||||||||
Element: Minimise waste and dispose of waste, as appropriate | ||||||||
Element: Complete required logs and reports according to SOPs |