This unit covers the competency to develop patterns, cut, sew and fit loose covers to upholstered furniture.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Nil
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence
Interpret work order and locate and apply relevant information
Identify and select materials used and any special handling requirements for those materials
Follow work instructions, operating procedures and inspection practices to:
minimise the risk of injury to self and others
prevent damage to goods, equipment and products
maintain required production output and product quality
As a minimum:
develop two patterns for loose covers for given items of furniture (one plain and one patterned)
measure and cut fabrics to required size and accuracy, matching any patterns
sew fabric and fit to items of furniture
Work effectively with others
Modify activities to cater for variations in workplace contexts and environment
Resource implications
Appropriate tools and equipment, plain and patterned fabrics, sewing machines, furniture to be upholstered, work order, workplace information including work procedures and/or equipment instructions.
Method of assessment
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.
Assessment should be by direct observation of tasks and questioning on underpinning knowledge.
Assessment should be conducted over time and may be in conjunction with assessment of other units of competency which form a part of the job role.
Context of assessment
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills
collect, organise and understand information related to hand and power tools, work orders, maintenance systems and safety procedures
communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with work supervisor, other workers and customers, and the reporting of work outcomes and problems
plan and organise activities including the preparation and layout of the work area to avoid any back tracking, workflow interruptions or wastage
work with others in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity
use mathematical ideas and techniques to correctly complete measurements and estimate material requirements
use pre-checking and inspection techniques to anticipate problems, avoid re-working and wastage
use the limited workplace technology related to the manufacture and fitting of loose covers to upholstered furniture
Required knowledge
work requirements including workplace standards and workflow
fabric types and characteristics, common faults and inspection procedures
design features of the finished furnishing items in relation to laying out the pattern and cutting the fabrics
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Unit scope
This unit addresses the development of a pattern to meet a requirement, cutting from that pattern and the fitting of loose covers to items of upholstered furniture.
Unit context
Workplace health and safety includes OHS legislation, material safety management systems, hazardous substances and dangerous goods codes and safe operating procedures
Work requires individuals to demonstrate discretion, judgement and problem solving skills in the manufacturing and fitting of loose covers
Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements
Machines may include, but are not limited to:
single or multi-needle flat bed
walking foot
overlocker and gatherer
Sewing machine set up and adjustments include:
threading machine and winding bobbin
setting required tensions
selecting required machine settings
lubricating and adjusting the machine
and testing operations for work order requirements
Materials to be machined may include but are not limited to:
plain and pattern fabric
velvet
Personal protective equipment
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise practices and procedures. It may include:
safety glasses/goggles
hair net
ear muffs/plugs
footwear and protective clothing
Information and procedures
Machine manufacturer specifications and operational procedures
Workplace procedures relating to the development of patterns and setting and operation of machinery
Work instructions, including job sheets, plans, drawings and designs
Workplace procedures relating to reporting and communication
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Specifications concerning design, fabrics, accessories and finish are confirmed with designer/customer/client, as required
Workplace health and safety requirements, including personal protection needs, are observed throughout the work
Materials, work method and sequence are determined
Suitable work area is selected, prepared and cleaned of any contaminants
Appropriate equipment and tools are selected and checked for safe operation
3D templates are developed from the surface of the existing furniture, without undue distortion
Component shapes are marked out and/or cut out using appropriate technique
Standard 2D patterns are produced in accordance with specifications and to accepted standards and construction tolerances
Patterns are reviewed against client specifications and production requirements
Consultation and clarification with client is undertaken, as required
Fabrics are selected and inspected in accordance with work order and laid out smooth and square
Nap/pile, direction of pattern, pattern repeat and finished side of the materials are identified
Fabrics are squared up to the edges or guide markings on the cutting table
Patterns are laid out using registration points on the pattern and other instructions to match required fabric pattern, ensuring maximum use of the fabric
Fabric is cut and cut components are inspected in accordance with workplace procedures
Sewing machine set up requirements and adjustments are identified and followed
Machine sewing maintains required product quality and outputs
Finished loose covers are checked for required quality and reprocessed in accordance with workplace procedures
Loose cover is applied to the upholstered furniture and checked for fit
Decorative accessories are applied as required
Adjustments are made, as required, to ensure fit meets required quality standards and specifications
Workplace documentation is completed in accordance with procedures
Waste and scrap are collected and disposed of/recycled in accordance with workplace procedures
Tools and equipment used are cleaned, inspected for serviceability and stored in accordance with workplace procedures
Equipment is maintained and work area is cleaned in accordance with workplace procedures
Forms
Assessment Cover Sheet
LMFUP3007B - Manufacture and fit loose covers
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
LMFUP3007B - Manufacture and fit loose covers
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent